How To Operate - Epson IR-320 Technical Reference Manual

3. When this program starts, the following screen appears.

How to Operate

Initial Screen
Select the button with the arrow buttons (← and →, ↑ and ↓), and press Enter to execute the
command.
File
This key is used to specify the key definition file name. Enter the file name, and press Enter. To
cancel, press Esc.
Load
This key is used to read the data from the key definition file specified by the File button.
Save
This key is used to save the data under the key definition file name specified by the File button.
Edit
This key is used to edit the key definition by using the following procedure:
1. The 28 keys are displayed on the screen in the same array as the keyboard unit. Select the
key to be edited with the ←, →, ↑, and ↓ keys, and press Enter to start the editing.
2. Press the keys one by one according to the contents of the key to be defined. The key
definition contents are displayed in order of inputting in the New column in the lower part
of the screen. The previous key definition contents are displayed in the Old column.
3. When Alt + Ctrl is pressed, the process retraces the inputted key contents by one key
contents. When Ctrl + Shift is pressed, the key definition is fixed, and the Key Selection
screen is displayed again. When Shift + Shift is pressed, the inputted key definition is
cancelled, and the Key Selection screen is displayed again.
4. The key top of the edited key is displayed in red.
5. To exit the editing on the Key Selection screen, press Esc.
Rev. C
IR-320 Technical Reference Manual
Utilities 4-59