Table of Contents
Advertisement
CAUTION:
The setup is executed with the SVGA display.
Setting the recognition range of the double click
When connecting the LCD with the touch panel and making a setup, the touch panel driver is
automatically installed and the double click setting registry key of Windows is modified.
But when a new user first logs on, the default value of Windows is applied to the value of the
registry key, so the registry key must be modified for individual users.
When you set up Windows 2000 and create a new user, you have to modify the registry key for
individual users by following the steps below.
Note
The administrator modifies the registry key.
Method
Select Programs - Epson Touch Panel Tool - Touch Panel Configuration Tool from the Start
menu. Click OK. (There is no need to do any other operation.)
Various Configurations (Windows 2000)
Various configurations are executed during the setup procedure, and the keyboard and the
mouse are automatically set. To change their configurations, use the control panel.
Setting the Network
A dialog box prompting the user to manually install the network is displayed. Set the network
settings by the following procedure.
1. Open the Control Panel, then select Network and Dial-up Connections.
2. The Network and Dial-up Connections dialog box is displayed. Select Make New
Connection.
3.
The Network Connection Wizard starts. If the location information setting has not been
completed by this time, the Location Information dialog box is displayed at this time. Set the
settings in accordance with the environment, then click OK. If all the location information
has been set, this dialog box is not displayed. Proceed to item (5) and set the settings in
subsequent steps.
4. The Telephone and Modem Option dialog box is displayed. Select the location set in the
previous item, then click OK.
5. The Network Connection Wizard opening dialog box is displayed. Click Next.
3-8 OS and Drivers
Rev. C
Advertisement
Table of Contents
