Table of Contents
Advertisement
Confidential
Setting drawer ON time
The drawer ON time option sets the length of time of the voltage signal necessary to open the
cash drawer.
To set the time, select the Drawer ON Time option from the setup pull-down menu. The dialog
box is displayed. Specify the length of time of the voltage signal in units of milliseconds that the
cash drawer requires. Any value within a range of 0 to 500 ms can be set. The time that has been
set here is rounded to the minimum units that can be set for the TM printer connected. The
minimum unit is 10 ms for the TM-930 series and 2 ms for the other TMs.
For the appropriate value to be entered, see the instruction manual for the cash drawer.
6-10 Device Diagnostics Utility
Rev. C
Advertisement
Table of Contents
