Table of Contents
Advertisement
Starting the Touch Panel Right Button Emulator
Start the touch panel right button emulator by the following procedure.
1. Start Windows.
2. Select Programs – EPSON Touch Panel Tool – Right Button Emulator in that order from the
Start menu.
3. The touch panel right emulator starts and the following dialog box is displayed.
Operation
1. Setting the Mode
The touch panel right button emulator is equipped with the following two modes.
1. 1 tap mode
One tap only after the right button is specified is recognized as a right click. This mode is set
as the default.
2. Right Fix Mode
Taps after the right button is specified are always recognized as right clicks.
The mode is switched in the right button emulator menu. The menu is displayed by tapping the
icon on the title bar; then the desired mode is selected. The set mode is displayed underneath the
mouse icon.
2. Switching between the right and left buttons
Switching between the right and left buttons can be accomplished by tapping the mouse icon.
The mouse icon color changes to the color corresponding to the right button or left button each
time the icon is tapped, enabling the operator to recognize which button is selected.
Rev. C
IR-320 Series Technical Reference Manual
OS and Drivers 3-63
Advertisement
Table of Contents
