Table of Contents
Advertisement
Start
The key definition utility for DOS is stored in the following directory by default:
C:\Program Files\Key Config\poskb.exe
(In DOS mode, this file is shown as C:\progra~1\keycon~1\poskb.exe)
To execute this utility, quit Windows and restart the IR-310/320 in the DOS mode. Type the
command name on the keyboard and the following screen is displayed.
Basic Operations
The utility has the five command buttons below:
File
Load
Save
Edit
Download
Select the command with the right or left arrow key, and press Enter to execute it. To exit the
program, select Quit.
File Command
When you select File, the following screen is displayed.
4-62 Utilities
Names the file. Key definitions are saved or loaded using the file name created
with this function.
Loads the key-definition data file you specify.
Writes key-definition data to the disk file named by the file function.
Edits key definitions one key at a time.
Writes the key-definition data to the keyboard memory. The keyboard data does
not change until the key-definition data is downloaded.
Rev. C
Advertisement
Table of Contents
