Table of Contents
Advertisement
LPT1 print test
The LPT1 print test prints the standard print pattern onto the printer connected to the LPT1
port.
When the test finishes normally, OK is displayed in the message area of the screen. When the
test fails, an error message is displayed.
NOTE
Set the BIOS of the COM/LPT port in default.
For the COM5/6 test, set the COM1/2 to Disable and set the COM5/6 to the follows.
COM5
COM6
Rev. C
F3F8
IRQ4
F2F8
IRQ3
IR-320 Technical Reference Manual
Device Diagnostics Utility 6-13
Advertisement
Table of Contents
