Table of Contents
Advertisement
Install the AC line tool using the following procedure.
1. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive. Start
Win2K\Epsbatt\EPSBATT.EXE.
2. The Welcome dialog box is displayed. Click Next.
3. The Complete dialog box is displayed. Confirm that [Yes, I want to restart my computer
now] is selected, and click Finish to reboot the system.
Uninstalling the AC line tool
Uninstall the AC line tool using the following procedure.
1. Open the Control Panel, and select Add/Remove Programs.
2. The Add/Remove Programs dialog box is displayed. Click Change or Remove Programs to
display a list of the currently installed programs. Change/Remove will be displayed when
EPSON AC Line watching is selected. Click Change/Remove.
3. The Confirm File Deletion dialog box is displayed. Click OK.
Power button prohibited setting tool for windows 2000
The Power button prohibited setting tool is the tool setting the registry to prohibit the shift to the
shutdown and the stand-by mode even if the front power switch is pressed. It can prevent the
shutdown of the system even if the front power switch is pressed by mistake.
Note
Note on
Note
Note
on
on using
on
using
using
using
When Power Options of Windows are updated, the setting is cleared, so always set after
updating the Power Options.
How to use e e e
How to us
How to us
How to us
1. Insert the Driver CD-ROM for the IR-320 in the CD-ROM drive. Start
Win2K\Dissw\DISSW.EXE.
2. The following message is displayed. Click Yes. If No is clicked, the installation stops
processing and returns you to Windows.
3-38 OS and Drivers
for windows 2000
for windows 2000
for windows 2000
Rev. C
Advertisement
Table of Contents
