Windows 98 Set-Up Procedure - Epson IR-320 Technical Reference Manual

Windows 98 Set-Up Procedure

Windows 98 is set up by using the following procedure:
1. Connect the keyboard and mouse to the IR-320.
2. Turn on the PC to start Windows 98 SE.
3. The Enter Network Password dialog box is displayed. Input the password and click OK.
4. The Welcome screen is displayed. Input the necessary information and click Next.
5. The Windows End User license Agreement is displayed. Read it though and confirm your
agreement to the terms. And then select [I accept this agreement] and click Next to proceed.
6. The Windows Product Key screen is displayed. Input the 25-digit product key shown on the
COA (Certificate of Authenticity). Click Next to begin setup. If you enter an incorrect key, a
message is displayed indicating that. Select [Re-enter valid product key] and then click Next
to return to the Windows Protect Key screen and input the product key again.
7. When setup is completed, the Congratulations screen is displayed. Click Finish.
8. The system asks you to set the Date and Time properties. Check the properties displayed,
and change them as needed. Click Close to confirm the settings.
9. The system setting is automatically updated, the system is rebooted, and the Windows 98 SE
desktop appears.
Support Information
Select the My Computer icon on the desktop, click the right mouse button and select Properties
from the pull down menu.
Click the Support Information button; the information on the contact is displayed.
Rev. C
IR-320 Series Technical Reference Manual
OS and Drivers 3-23