Startup/Exit/Initialize
Startup
Press F10 during the POST process, and the message Diagnostics program will execute
after POST will appear, and the device self-diagnostic utility will start after the POST process.
Exit
When you select Exit from the menu, the device diagnostics utility is closed, and the IR-320 is
reset.
Initialize
When you select Initialize from the menu bar, the device self-diagnostic utility is initialized.
If the TM status message column in the TM/Drawer area or the DM status message column in
the DM area shows No communication, remove the cause, and select Initialize to initialize
the program.
Screen Layout
When the device diagnostic utility starts, the following screen appears.
The device self-diagnostic utility screen is divided into the following five areas.
TM/Drawer
DM
COM Ports
Rev. C
IR-320 Technical Reference Manual
Device Diagnostics Utility 6-3