Attaching To The Tm-H6000 Series/Tm-U675 - Epson DM-D110 Technical Reference Manual

2.4.2 Attaching to the TM-H6000 Series/TM-U675

The DM-D110 can be attached directly to the TM-H6000II/TM-U675 printers using the "DM-D
pole unit for TM printers (Type A)" (DP-502). You can attach fixing plate A on either side of the
TM-H6000II/TM-U675. After attaching it, you can slide the display freely.
2.4.2.1 Required items
The following items are used to attach the DM-D110 to the TM-H6000II/TM-U675 printers.
These items are packed with the "DM-D pole unit for TM printers (Type A)" (DP-502).
stopper
fixing screws for
rubber feet (small)
support C
. A
Rev
angle fixing
fixing screw
screw
for stopper
rubber feet (small)
support B
for extension
DM-D110 Technical Reference Guide
fixing plate B
fixing screws for
fixing plate B
fixing plate A
Setup information 2-11