Suspend Mode - Epson IR-320 Technical Reference Manual

Note that the reset operation differs, depending on the BIOS setting for the switch, when the soft
power switch is pressed during the video off mode.
Type of OS OS Setting
Windows XP Shutdown
Standby
Never
Windows 2000 Shutdown
Standby
Windows 98 Standby
MS-DOS
When "Power Button Tool" is installed, Win 98 and Win 2K can realize "No-Operation".
For Windows 2000, even if the soft power switch is pressed accidentally in the video off mode, it
stays in the video off mode.

(5) Suspend Mode

Turning off such items as the LCD, backlight circuit, and CPU when there is no input operation
for a specified time period in the full on mode extends the life of these parts.
In Windows 98, click Start, select Shut Down, and then select Standby in the Shut Down dialog.
In Windows NT, do not set up Suspend, because the system clock is delayed..
Type of OS Setup method for time of transfer to suspend mode
Windows XP Set with [Power Management] property — [ System Standby]
Windows 2000 Set with [Power Management] property — [ System Standby]
Windows NT Do not set up.
Windows 98 Set with [Power Management] property — [System Standby]
MS-DOS Set with BIOS [Suspend Timer]
In the suspend mode, the mode is immediately reset to the full on mode when input is received
from the keyboard, mouse, HDD,FDD or touch panel. Also, the suspend mode is always
changed to the full on mode when the soft power switch is pressed, regardless of the BIOS
switch setting.
Rev. C
BIOS [Soft-Off by PWR-BTTN] setting
Instant-Off Delay 4 Sec.
Full-on Full-on
Full-on Full-on
No-Operation
Full-on Full-on
Full-on Full-on
Full-on Full-on
Forced power off Reset to the full on
mode
IR-320 Technical Reference Manual
Disabled
Shutdown
Standby
Shutdown
Standby
Standby
IR-320 System Overview 1-11