Table of Contents
Advertisement
Confidential
2. To get power for the TM printer from the IR-320, remove one or more tabs from the DC cable
exit by breaking them off with a pair of pliers.
3. When setting up the TM printer on the printer tray, wrap the cable around the poles on the
other side of the tray, as shown below, to keep it out of the way.
4. Slide the printer tray in the direction of the arrow, and fit the hooks on the printer tray into
the slots in the IR-320.
Rev. C
OI-R01-001
IR-320 Technical Reference Manual
OI-R01-022
Setup 2-53
Advertisement
Table of Contents
