Table of Contents
Advertisement
After the restart, when there is no HDD access for the time set, the HDD Power Down Timer
switches over to HDD Power Down and the motor of the HDD stops.
Note:
This function can be used only with BIOS version 2.13.00 or higher. If your BIOS version is before 2.12,
upgrade the BIOS and then do the above procedure.
When access to HDD occurs, the motor of HDD begins to start and the HDD becomes accessible.
Windows 98/2000/XP
Windows 98 and later operating systems have a hard disk drive power down function.
Therefore, this function can be used to control hard disk drive power down in these
operating systems.
5-16 BIOS Functions
Rev.C
Advertisement
Table of Contents
