Table of Contents
Advertisement
Confidential
CAUTION:
Detour the extra length of the cable around the power fan. If the cable interferes
with the power fan, abnormal noise may be emitted, or the cable may be
disconnected.
Do not connect any cable other than the customer display cable, such as a
telephone line, to the connector for the customer display.
6. Set the DIP switch so that the baud rate of the customer display is the same as the baud rate
of the printer unit. The position of the DIP switch should be set as follows:
Note:
The customer display and the baud rate of the dedicated printer unit are set to the same speed at the factory
shipment.
ON
ON
1
2 3 4 5
6 7 8
1 2 3 4
Rev. C
DM-D110
IR-320 Technical Reference Manual
DM-D210
DM-D500
Setup 2-65
Advertisement
Table of Contents
