Table of Contents
Advertisement
File format (continued)
Section
Entry
[MSR]
ValidTracks
Beep
CodeType
CardStart
CardEnd
Track1Start
Track1End
Track2Start
Track2End
Track3Start
Track3End
JIS2Start
JIS2End
CodeDefinition00
When nothing is described after the entry, the entry setting is deleted.
For Sysparam00 and CodeDefinition00, set numeric numbers in a range from 00 to 99. Set the numeric values one
by one in ascending order. Do not input the same numeric value for more than one.
The default setting (U.S. mode) is described as follows:
[General]
Version=PKL100
IgnoreCommands=Off
[MSR]
ValidTracks=1,2,3
Beep=On
CodeType=US
CardStart=
CardEnd=
Track1Start=%
Track1End=?
Track2Start=;
Track2End=?
Track3Start=+
Track3End=?
4-70 Utilities
Parameter
(underlined parameters
are the default values)
Selected from 1, 2, and 3
On, Off
US, JP, FR, GR, SP
Remarks
Selection of more than one value may be
selected.
For information on input enabled characters, see
SS/ES Code Input Enabled Characters.
[<, >, |] are characters and can be input.
Input the hexadecimal as [\nn] within a range
from [01h] to [7Fh].
Effective up to 7 characters. The 8th character
and those thereafter are neglected.
Because even the line-feed character is
effective, do not carelessly input a space or a
tab.
See "Code Conversion Entry" on page 4-71 for
further details.
Rev. C
Advertisement
Table of Contents
