Table of Contents
Advertisement
Setting a password for the drawer kick-out test
Follow the procedures below to set a password for the drawer kick-out test.
1. Select Drawer Password from the pull-down menu. Enter the password.
2. Type a password, and press Enter. The password should be four to eight alphanumeric
characters. It is case sensitive. Enter at least four alphanumeric characters.
3. The Re-enter message appears. Enter the password again, and press Enter. Then the
password will be saved.
If a password is set, you will be asked to enter the password each time the drawer kick-out test is
executed.
Changing/deleting the password for the drawer kick-out test
Follow the procedures below to change or delete the password for the drawer kick-out test.
1. Select Drawer Password from the pull-down menu. Enter the password.
2. Type the current password, and press Enter.
3. The message New appears.
4. To delete the password, only press Enter, and the password will be deleted. To set a new
password, type the new password, and press Enter.
5. The message Re-enter appears. Type the password again, and press Enter to confirm the
new password.
Rev. C
IR-320 Technical Reference Manual
Device Diagnostics Utility 6-9
Advertisement
Table of Contents
