Installing A Front Compactflash Card Adapter (Oi-R07) - Epson IR-320 Technical Reference Manual

Confidential
11. Reattach the side panel with two screws.
12. Reattach the side cover.
13. Close the front panel.

Installing a Front CompactFlash Card Adapter (OI-R07)

CAUTION:
The front CompactFlash card adapter is precise equipment; so handle it gently. When
you remove and install the front CompactFlash card adapter. be careful not to subject
it to small shock, vibration or bending, because this may damage it.
Card type
Power supply
I/F mode
Connection to the main body
1. Open the front cover of the IR-320. If the front cover is locked, unlock it with the key. (You
may need to press in slightly as you turn the key.)
Rev. C
One Type I or Type II
+3.3 V/50 mA (max.)
True IDE mode
Secondary IDE bus (master) connection
front cover
IR-320 Technical Reference Manual
Setup 2-21