Table of Contents
Advertisement
File Name:
/n:
A dialog box that shows the status during transfer of the settings is displayed. The following contents are
displayed in the dialog box. nn is the layer No. or the key No., and rr is the number of retries, up to a
maximum of 6 times.
Switching layers Now switching to layer #nn(xrr)...
Setting 28 keys
Setting Change Layer key
Notes
This utility is available in an English message version only.
This utility cannot be used during programming with 28keyCfg. or other key definition utility.
The keyboard and mouse do not respond during reading or writing of the settings.
As much as possible, do not perform any operations that would generate an interrupt, such as tapping
the touch panel, during reading or writing of the settings.
The Layer 28-key Auto Definition Utility for MS-DOS
Outline
This is a MS-DOS utility that loads definition files created with the layer 28 keyboard definition utility. It is
used when performing batch processing, etc.
Command
Execute commands in the following format.
PKLDL.EXE data-file
Processing Details
This utility sets the following data automatically.
•
Saved Layer 28-key Auto Definition Utility for Windows files (.L28).
This utility is not compatible with the following data.
•
Saved Windows 84-key Definition files (.K84)
•
Saved Windows 28-key Definition files (.K28)
4-40 Utilities
This is the path name of the set file ("* * * .l28").
If the n option is specified, the following dialog box is displayed during
closing.
Now Programming keyboard #nn(xrr)...
Now Programming layer change key #nn(xrr)...
Rev. C
Advertisement
Table of Contents
