Table of Contents
Advertisement
POST processing message
The BIOS displays the message of the POST processing while POST ( Power On Self Test ). These
messages are displayed until the operation system is booted. When the following message is
displayed, input according to the message. So another processing is done.
Table 5-9 POST processing messages
Message
Press DEL to enter SETUP, ESC to
skip memory test
Press DEL to enter SETUP
Press F10 to run device diagnostics
program
(Reference)
EPSON IM-320 BIOS Ver X.YY.ZZ
Rev.C
Description
This message is displayed in the lower left of the screen. Press ESC to omit the
full memory test. Press DEL to start POST again.
Press F10 to boot the device diagnostics utility.
The version of the BIOS is displayed.
IR-320 Technical Reference Manual
5-33 BIOS Functions
Advertisement
Table of Contents
