Table of Contents
Advertisement
Power Button Tool (For Windows 2000)
Power Button Tool (For Windows 2000)
Power Button Tool (For Windows 2000)
Power Button Tool (For Windows 2000)
This tool is used to set the registry so that neither the shut down mode or stand-by mode can be
entered even if the front power switch is pressed. This can prevent the system shut down due to
an incorrect operation of the front power switch.
Notes on usage
If you update the [Power Control] of Windows, the settings are cleared. Therefore, be sure to set
the settings after updating it.
Usage
1. Execute C:\backup\dissw\DISSW.EXE.
2. The following message appears. Click [Yes].
3. When the registery is set, the following message appears. Clicking [Yes] reboots Windows
and the settings are available. Clicking [No] returns to Windows without the settings being
available. In this case, if you reboot Windows, the settings are available.
BaySwap
Once you install the BaySwap software, you can insert and remove CompactFlash cards while
the IM-320 is in operation. BaySwap can only be used under Windows NT.The software must
first be installed from the floppy disk supplied if it is to be used.
4-78 Utilities
Rev. C
Advertisement
Table of Contents
