Table of Contents
Advertisement
Confidential
Installing a Printer Tray
Dedicated printers are designed especially for the IR systems. Any of these printers can be
installed directly on the main body. When a dedicated printer is not used, a printer tray can be
installed and other types of TM printer can be installed on the printer tray.
Two types of printer tray can be connected to the IR-320.
Model name
OI-R01-001
OI-R01-022
Mount the printer tray by following the procedure below. If a TM printer is not being used,
begin with step 3.
1. Remove the portion shadowed in the figure below from the printer tray. Cut off the two
plastic connecting pieces (burrs) with a cutter or nippers, and pull the piece down toward
you. Bend the part back and forth two or three times, so that it can be cut off. Pass the cable
through the new opening.
CAUTION:
If burrs are left after the hatched part is removed, they may cause cuts or scratches.
Remove the burrs left on the printer tray with a cutter, or file them down.
2-52 Setup
Compatible printers
TM-T88 series, TM-U200 series
TM-H6000 series
Rev. C
Advertisement
Table of Contents
