Table of Contents
Advertisement
Confidential
CD-ROM Drive(Optional)
Interface:
Transfer mode:
Readable media:
DA, Photo CD, CD-I (mode2 form1,form2), CD-I Ready, CD-I Bridge, CD-WO, Video CD,
Enhanced Music CD (CD Plus), CD-RW
Media size:
Size:
Power:
Reading:
Weight:
Manufacture:
Model number:
•
CD-ROM drive is connected to the Primary IDE, and operates as Slave Drive.
•
It cannot play music CD.
CompactFlash Card(Optional or Specified Product)
It is possible to use a CompactFlash card mounted in SR-600 as a substitute for a HDD or CD-
ROM. The compact flash card is directly connected to the Primary IDE bus and operates in the
mode called True IDE mode. When the compact flash card is mounted as a substitute for a HDD,
it operates as a Master Drive. When compact flash card is mounted as a substitute for a CD-
ROM, it operates as a Slave Drive. Either Type I(3.3mm height) or Type II(5mm height) card can
be used. In addition, the power is +3.3V.
The CompactFlash Association, which establishes the CompactFlash standard, establishes two
specifications. Also, two power level is defined in the CF+ card. Level0 is same as the
CompactFlash standard. Level1 is defined that the maximum electric current is 500mA although
the power supply is 3.3V or 5V. Although the Host side is not required to support Level1, it does
not creat a problem if 500mA electric current flows in the SR-600.
Table 5-7 The differences of Compact Flash and CF+
Operation mode
PC Card
Memory code
Compact
O
Flash
Rev.A
ATAPI (Primary)
PIO Mode4, Single word DMA Mode2, Multi word DMA Mode2
CD-ROM (mode1, mode2), CD-ROM XA (mode2 form1,form2), :CD-
12cm or 8cm
128(W) x 127(D) x 12.7(H) mm
single +5V
650mA, seek/Spin-up: 750mA, peak : 1500mA
245g (typ.) Drive only
EPSON
OI-S02
PC Card
I/O mode
True IDE mode
O
O
Developer's Guide SR-600
Maximum electric current
+5V
100mA
Hardware Specifications 5-19
+3.3V
75mA
Advertisement
Table of Contents
