Assembling; Attaching To The Ir Series - Epson B134101 - DM D210 - Vacuum Fluorescent Display Character Installation Manual

Assembling

Attaching to the IR series

The DM-D210 can be attached directly to the IR series using the "DM-D
pole unit for IR" (DP-504).
Required items
The following items are used to attach the DM-D210 to the IR series.
These items are packed with the "DM-D pole unit for IR" (DP-504).
fixing screws
base
Assembling steps
1. Pass the cable for the DM-D210 through support A, and attach
support A to the DM-D210.
When using support B for extension, insert the tab on support B
into the hole on support A until you feel it click.
support A
support B
(for extension)
When using support B for
extension
7