4.3.2 DP-110 Power Supply Connector
The base unit of the DM-D stand provides two power supply connectors. One is used for the
input terminals from the external power supply and the other is used to supply power to the
printer. Both connectors have the same electrical characteristics (signal functions, signal
direction, signal level). These connectors can be used for the DM-D110 power supply connector
to the display interface board or the power supply connector to the printer.
Type: 3-pin locking type connector.
4.3.2.1 Power supply connector pin assignments
Power supply connector pin assignments
Pin Number
1
2
3
SHELL
4-8 Hardware
Signal Name
Signal Direction
+24V
—
GND
—
NC
—
FG
—
Signal Function
Power supply line
GND
Unused
Frame GND
Rev. A