Choosing Pilot Data Record To Modify; Changing Pilot Data Record Position - Furuno FEA-2107-BB Operator's Manual

To add a new pilot data record by Add button:
1. Open the Edit page of the Plan Pilot Data dialog box then check Enable changes.
2. Click the Add button. This adds a new pilot data record to the end of record, and it is a copy of current pilot
data record.
3. Modify position of pilot data record. For how to modify position, see section 16.5.3 Changing pilot data record
position.
4. Modify other data of pilot data record as appropriate. For how to modify other data in a pilot data record, see
section 16.5.4 Changing other data of pilot data record.
16.5.2

Choosing pilot data record to modify

The Current box in the Plan Pilot Data dialog box shows the pilot data currently selected for modification. To
choose a different pilot data the following methods are available:
•
Enter desired record number in the Current box, using the scrollwheel; spin the scrollwheel to choose record
number then push the scrollwheel.
•
Place the cursor on desired pilot data in the electronic chart area, then push the scrollwheel.
16.5.3

Changing pilot data record position

To change the position of a pilot data, two choices are available:
•
Enter latitude and longitude in the Position field on the Edit page.
•
Drag and drop pilot data mark using the trackball and left mouse button.
Entering latitude and longitude in position field
1. Open the Edit page of the Plan Pilot Data dialog box then check Enable changes.
2. Choose desired pilot data, following section 16.5.2 Choosing pilot data record to modify.
3. Enter co-ordinate in Lat (Lon) field as appropriate. Spin the scrollwheel to change digit then push the
scrollwheel to confirm.
Dragging and dropping pilot data to new position
1. Open the Edit page of the Plan Pilot Data dialog box then check Enable changes.
2. Use the trackball to put the cursor on the pilot data you wish to move.
3. Press and hold down the left mouse button while rolling the trackball to position the pilot data mark where
desired. Keep the button pressed and held down while you move the cursor and release it when the cursor is at
position desired.
16. Pilot Data
16-9