Waypoint Marker - Furuno 1815 Operator's Manual

5. OPERATION
5.36

Waypoint Marker

The waypoint marker shows the location of the destination waypoint set on a naviga-
tion plotter. The heading signal or course data are required. You can turn on/off the
waypoint marker as follows:
1. Press the MENU/ESC key to open the menu.
2. Use the Cursorpad ( or ) to select [Others] and press the ENTER key.
3. Use the Cursorpad ( or ) to select [WPT Mark] and press the ENTER key.
4. Use the Cursorpad ( or ) to select [Off] or [On] then press the ENTER key.
5. Press the MENU/ESC key to close the menu.
5-52
+
Waypoint marker
WPT Mark options
Waypoint
marker