2. OPERATION
2.38
Waypoint Mark
The waypoint mark shows the location of the destination waypoint set on a navigation
plotter. The heading signal or course data are required. You can turn on/off the way-
point mark as follows:
1. Press the MENU/ESC key to open the menu.
2. Select [Others], then press the ENTER key.
3. Select [WPT Mark], then press the ENTER key.
4. Select [Off] or [On] then press the ENTER key.
5. Press the MENU/ESC key to close the menu.
2-46
Waypoint
mark
+