Touch Screen Calibration; Cleaning The Glass Display/Scanner Aperture; Figure 17 Touch Screen Recalibration - LXE MX3X User Manual

Hide thumbs Also See for MX3X:

Table of Contents

Touch Screen Calibration

If the MX3X is not responding properly to pen touch taps, the touch screen may need to be

recalibrated. Press <Ctrl>+<Esc> to force the Start Menu to appear, if needed. Contact your

System Administrator for assistance.

To recalibrate the screen, select Start | Settings | Control Panel | Stylus | Calibration.

To start, tap Recalibrate. Follow the instructions on the screen and press the Enter key to save the

new calibration settings or press <Esc> to cancel or quit.

See the "MX3X Reference Guide" for complete instructions.

Note:

These instructions are for components made of glass. If there is a removable protective

film sheet on the display screen, remove the film sheet before cleaning the screen.

Keep fingers and rough or sharp objects away from the scan aperture and display. If the glass

becomes soiled or smudged, clean only with a standard household cleaner such as Windex(R)

without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based

cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-free

cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.

Lint/particulates can be removed with clean, filtered canned air.

MX3X User's Guide

Touch Screen Display

E-EQ-MX3XOGWW-A

Table of Contents