Avalanche Update Using File | Settings; Menu Options - LXE MX7 Tecton CE Reference Manual

Avalanche Update using File | Settings

Avalanche Update using File | Settings
Use these menu options to setup the Avalanche Enabler on the MX7 Tecton. LXE recommends changing settings and then
saving the changes (reboot) before connecting to the network.
Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink Avalanche Mobility Center
User's Guide for details).

Menu Options

Note: Your MX7 Tecton screen display may not be exactly as shown in the following menu options. Contact your
representative for version information and upgrade availability.
Connection
Execution
Server Contact
Preferences
Taskbar
Scan Config
Display
Shortcuts
Adapters
Status
Enter the IP Address or host name of the Mobile Device Server. Set the order in which serial ports or
RF connections are used to check for the presence of the Mobile Device Server.
Not available in this release. LXE recommends using AppLock, which is resident on LXE Windows
CE devices.
Setup synchronization, scheduled Mobile Device Server contact, suspend and reboot settings.
Set options for Enabler startup or shutdown and logging.
Set options for Taskbar.
This option allows the user to configure Enabler settings using a special barcode that is created by
the Avalanche MC Console. Scan Config not currently supported by LXE.
Set up the Windows display at startup, on connect and during normal mode. The settings can be
adjusted by the user.
Add, delete and update shortcuts to user-allowable applications.
Enable or disable network and wireless settings. Select an adapter and switch between the
Avalanche Network Profile and manual settings.
View the current adapter signal strength and quality, IP address, MAC address, SSID, BSSID and
Link speed. The user cannot edit this information.
E-EQ-MX7CERG-A [ 222 ] MX7 Tecton™ CE Reference Guide
LXE