Tone Pulse Dialing; Transfer Off-Premise; Transfer To Guest Mailbox; Transfer To Speed Dial - Iwatsu ENTERPROSE-CS Owner's Manual

Tone Pulse Dialing

Analog trunks may be programmed for either Touch Tone or Rotary dialing to
accommodate your local phone company central office.

Transfer Off-Premise

Transfer Off-Premise allows any user to transfer a call to an outside party by
using the TRAN key followed by an outside line access code + outside
number.

Transfer to Guest Mailbox

Guest Mailboxes created in the voice mail system can be accessed from system
extensions and via transfer. Guest Mailboxes have the same capabilities as
system mailboxes; however, they are not associated with a specific station and
require no Iwatsu Enterprise-CS hardware (i.e., a dedicated Iwatsu Enterprise-
CS station port with a station terminal).

Transfer to Speed Dial

Iwatsu phones can transfer a call to a system or personal speed dial number
programmed to a fixed speed dial key by pressing TRANSFER plus the fixed
Speed Dial Key. Additionally, pressing TRANSFER + SPEED + bin number
will achieve the same result. Both supervised and blind transfer are supported.

Trunk Interfaces

The following outside line types are supported by the Iwatsu Enterprise-CS:

Loop Start trunks

Ground Start trunks

Caller ID trunks

OPS trunks

ANI trunks

DNIS trunks

DID trunks

E&M Tie trunks (T1)

ISDN PRI lines

SIP Trunks

Uniform Call Distribution (UCD)

Allows telephone lines to be directed to a group of phones. If all phones are
IWATSU ENTERPRISE-CS SYSTEM FEATURES - 78