Press the Speed key SPEED
Dial
Dial the desired Personal Speed Dial Code
Register the letters of the name using the dial pad
Press the key until the desired letter is displayed
Press the HOLD/DND key to enter that letter or number
The name may be 10 characters.
If you make a mistake, press the HOLD/DND key to back space to the desired
position.
The numbers on the dial pad represent the following for name registration:
,.,[space],1
G,H,I,4
P,Q,R,S,7
Alphanumeric
[FEAT] All delete
Press the Feature key FEAT to end the operation
To register several directory names:
After entering a name:
Press the Speed key SPEED
Dial
Dial the next Speed Dial Code number
Repeat the same procedure
To Speed Dial a Number
To Speed Dial a registered number, perform one of the following operations:
Outside Line Pre-Select (you select the outside line):
Lift the receiver
Press the key for an outside line
Wait for the dial tone
Press the Speed key SPEED
53
Ibid.
IWATSU TELEPHONE USER GUIDE - 154
-
A,B,C,2
D,E,F,3
J,K,L,5
M,N,O,6
T,U,V,8
W,X,Y,Z,9
Upper/lower case
&,0
[HOLD] Enter/1 character delete
-
53