Making an E-Response Help Call
SIP – Not Supported.
Lift the receiver or press [SPKR] and remain off hook on ICM for a
duration that exceeds the amount of time programmed in the system, or,
Lift the receiver to make an intercom call. Begin dialing. Between digits
stop dialing for more than 10 seconds, or,
Dial the E-Response Group access number at Intercom dial tone.
Transferring a Call to Another Extension
When speaking on an outside line:
Press and release the receiver button quickly or press the Flash key.
Wait for the dial tone.
Dial the desired extension number.
Hang up or announce the call, then hang up.
(Polycom SIP Station)
Press the Transfer soft key.
Dial the desired extension number.
For blind transfer: Press the Blind soft key and then hang up.
For screened transfer: Press the Dial soft key, dial the extension,
announce the call and then hang up.
If the call is not answered it will return to your phone.
Putting a Call on Hold
When speaking on an outside line:
Press the Hold key on the telephone, or, press and release the receiver
button quickly or press the Flash key.
Dial the Exclusive Hold code
Hang up.
A call placed on Hold may only be picked up by the extension that placed the
call on Hold.
SIP & SINGLE LINE TELEPHONE USER GUIDE - 203