Ix-16Psub Sixteen-Port Digital Station Card; Ix-4Csub-3 Omegatrek Wireless System Interface Card - Iwatsu ENTERPROSE-CS Owner's Manual

Table of Contents

Advertisement

IX-16PSUB Sixteen-Port Digital Station Card

The IX-16PSUB card interfaces 16 digital station terminals to the Iwatsu
Enterprise-CS. Each circuit of the IX-16PSUB card is star connected to an
Iwatsu Enterprise-CS digital telephone, DSS Unit, or Attendant Console using
#22/24 AWG one-pair twisted cable. If an IX-BPAD busy bypass unit is used
with an Iwatsu Enterprise-CS digital telephone, #22/24 AWG two-pair twisted
cable is required. Single-pair cable allows for bi-directional data transmission
or ping-pong transmission. The loop limit of Iwatsu Enterprise-CS digital
station terminals is 1000 feet. The loop limit can be extended using
IX-4SLREPU star repeaters.
Ports: 16 ports/card
Stations: 2 ports required for: IX-ATT,
1 port required for: 18d, Platinum 12d, Platinum DSS, IX-DSS-3, IX-DSS-
A-2, IX-BLF, IX-KTD/S-3, IX-12KTD-2, DCKT970
(may share a port with a key telephone), IX-DCKT900
(may share a port with a key telephone), IX-MKT, IX-
COMLINK-2, IX-DDPH, IX-BLF, IX-MSGU (per
channel), IX-BPAD, and IX-BPCU.
IX-4CSUB-3 Omegatrek Wireless System Interface
Card
The IX-4CSUB-3 card is a required component in Iwatsu Enterprise-CS
configured with the optional Omegatrek wireless communications system.
This card provides four circuits for IX-BS5 Omegatrek Base Station
termination. Each circuit connects an IX-BS5 base station using either two-
wire or four-wire cabling.
Ports: 16 ports/card
Circuits: 4 circuits/card.
Stations: 1 circuit required for each IX-BS5 Base Station
GENERAL DESCRIPTION - 40

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterprise-cs

Table of Contents