Iwatsu ENTERPROSE-CS Owner's Manual page 235

Repeat the procedure to enter additional numbers.
To register Personal Speed Dial Numbers (without an outside line group):
 Lift the receiver.
 Wait for the dial tone.
 Dial the Speed Dial Registration code
 Dial the Personal Speed Dial code
 Wait for the dial tone.
 Dial the phone number.
 Hang up.
Repeat the procedure to enter additional numbers.
58
To register a pause :
When registering the telephone number, at the place where you want to insert a
pause:
.
 Dial
-
 Dial
for the desired pause time in seconds.

To register the symbol in a number
When registering the telephone number, at the place where you want to insert a

:
.

Dial
To Speed Dial a Number
If you have a Touch-tone Phone:
 Lift the receiver.
 Wait for the dial tone.
.
 Dial
 Dial the Speed Dial code.
The system will automatically dial the registered number.
If you have a Rotary Dial Phone:
 Lift the receiver.
 Wait for the dial tone.
 Dial the Speed Dial Access code
58
This feature may not be used on ISDN PRI or ISDN BRI lines.
59
Ibid.
SIP & SINGLE LINE TELEPHONE USER GUIDE - 217
.
-.
59
:
.