One-Touch Group Text Messages; Station Text Message Registration; To Send A Text Message - Iwatsu ENTERPROSE-CS Owner's Manual

One-Touch Group Text Messages

Using the specially programmed Fixed Test Message key provides one-touch
operation to send a pre-programmed text message to multiple stations. Up to
16 stations can be assigned to a text message group and up to 250 groups can
be programmed in the ECS database. This feature is available on any Iwatsu
key telephone that can be assign a Fixed Text Message key.

Station Text Message Registration

To register Station Text Messages:
 Press the Feature key FEAT
 Press the Text Message multipurpose key TXT MSG

Dial the desired Personal Text Message Code
 Enter the desired message contents up to 16 characters in length. Use the
following keys on your telephone for text message data entry:
Press 1 2 3 4
1X - A D G
.
2X B E H
3X C F I
sp
4X 1 2 3 4
5X
 Press the Feature key FEAT to end the operation
To register several Text Messages:
After entering a text message:
 Press the Text Message multipurpose key TXT MSG

Dial the next Personal Text Message Code
 Repeat the same procedure as above

To Send a Text Message

To send a registered text message, perform one of the following operations:
Busy Bypass Text Message Operation
To select and send a busy bypass text message to another system extension:
 While calling a busy or idle extension
 Press TXT MSG
 Enter the desired text message number
To respond to a busy bypass text message while on a call:
 While on a call with a busy bypass text message on your display
IWATSU TELEPHONE USER GUIDE - 158
5 6 7 8 9 0
J M P T W &
K N Q U X 0
L O R V Y
5 6 S 8 Z
7 9

 
-
 
-
HOLD #
write character lower case
cancel character upper case

-
, or press TXT MSG.