Alternate Tone/Pulse Dialing
Allows you to change the dial signaling from Dial Pulse (Rotary) to DTMF
(Touch Tone) after an outside call has been answered. This will allow you to
use enhanced communications devices like Voice Mail and Automated
Attendant.
After the call is answered:
Press the Feature key FEAT then dial
ALTER and the lamp will be solid red
Automatic Outside Line Answer / Hold
This programming option allows you to receive a second call automatically by
simply pressing the Hold, Call Park.
While on a call:
Press the Hold HOLD/DND, Call Park PARK, or existing outside line
key.
Automatic Repeat Dialing
Allows you to instruct the ECS to dial an outside party until they answer. This
is accomplished by having the ECS periodically activate the speaker and dial
the outside party's number. Should they answer, you will hear their voice
through the speaker. In order to establish a call, you must pick up their
receiver. Should you be away from your phone when the called party answers,
they will hear silence and the ECS will try to call later.
If the called party does not answer or is busy:
Do not hang up
Press the Automatic Repeat key REPEAT and the lamp will be solid
red.
Hang up
To Cancel:
Press the Speaker key SPKR
Press the Automatic Repeat key REPEAT
Dial
and the lamp will be off
Wait for a confirmation tone
Press the Speaker key SPKR, or, lift the receiver while the ECS is
dialing the outside party
IWATSU TELEPHONE USER GUIDE - 106
, or, press the Alternate key