Call Divert; Program A Forward Destination - Iwatsu ENTERPROSE-CS Owner's Manual

if they are away from their phones.
To answer a call ringing at another extension:
When you hear the special Call Coverage tone or see either a slow or fast
green flashing lamp on a Call Coverage key:
 Lift the receiver
 Press the desired Call Coverage key
You will be connected to the calling party. Intercom calls will appear on your
phone's Intercom key ICM and Outside Line calls will appear on your phone's
Outside Line key.
To change the audible indication mode:
 Do not lift the receiver
 Press the Feature key FEAT
 Press the desired Call Coverage key and the present mode will be
represented by the lamp on the key and the display.
Mode
immediate:
delayed:
no ring:

 Dial
for immediate ring mode, dial
for no ring mode.

Call Divert

A station user can divert an incoming ringing call by pressing the MBOX key
to activate the Call Forward No Answer process. The Fixed Call Forwarding
Destination must be programmed in the ECS database by your system
installer. It can also be accessed through the Iwatsu phone browser
programmer.
Call Forward (5930, 5910 and 5810 Only)

Program a Forward Destination

You can set your phone to forward calls to another extension, to an external
telephone number, or a number stored in your Personal Speed Dial Bin.
You can also separate Call Forward destinations for ICM calls and CO
incoming calls. For example, you could forward all ICM calls to external
number or a number programmed in your Personal Speed Dial Bin and all CO
calls to another extension.
From the Self-Labeling Display Menu:
IWATSU TELEPHONE USER GUIDE - 114
Display
Immed.
Delayed
No ring

for delayed ring mode, dial
LED Indication
fast green flash
slow green flash
solid green
