Return A Self-Labeling Key To Its Default Name; Setup Menu (Iwatsu Icon 5930/5910/5810 Phones Only) - Iwatsu ENTERPROSE-CS Owner's Manual

Return a Self-Labeling Key to its Default Name:

If you have changed the name of the key and wish to return the key name to its
default setting.
 Press and hold (five seconds) the desired key that corresponds to the
label you want to return to the default name
 Delete the entry, press Save without entering a new name
 The default key label is now displayed
Change a Key Assignment on your Iwatsu ICON 5810,
50
5910, 5930 phone
 Press the Setup Menu key.
 Press User Options.
 Enter your Station Password and press Enter.
 Press the right navigation key to move to the next menu page.
 Select Key Assignment.
 Use the left or right navigation keys to scroll through and select one of
the Key Assignment Categories.
 Select the Key Type you want to add to you r key pattern.
 Select the key you wish to change on your station. The new Key Type
that you selected will display in the key location you have selected.
 Press Exit to return to the main screen.
Setup Menu (Iwatsu ICON 5930/5910/5810 Phones
Only)
From the Setup Menu you can pair a Bluetooth headset, change the LCD
Contrast, and activate a TFD (Ticker Field Display). The Setup menu can
only be accessed while the phone is in the idle mode.
50
If Key Assignment does not appear on your display, you do not have access to this
programming item. Phones that share a common key pattern cannot change Key Assignments
and you cannot change a key while the LED for that key is lit (red or green/solid or flashing).
IWATSU TELEPHONE USER GUIDE - 150