Executive Override; Extension Number Display; Feature Key Display - Iwatsu ENTERPROSE-CS Owner's Manual

Executive Override

Is the same as a Busy Override with the additional ability to override an
extension in Do Not Disturb. This override may be either a voice
announcement or tone signal.
When dialing an extension that is busy or in Do Not Disturb
 Do not hang up.
 Press the Override key OVER .
 Make a voice announcement or wait for a response to the tone signaling,
your choice is dependent on system programming.

Extension Number Display

Allows you to display your extension number on the display of an Iwatsu IP or
digital telephone equipped with an LCD.
To display an extension:
 Press the Feature key FEAT then dial

Feature Key Display

Allows you to display the function of your telephone's feature keys.
To display a feature key:
 Press the Feature key FEAT then dial
 Press the desired feature key.
Flash
Allows you to receive dial tone on the same outside line without having to
hang up. Flash may also be used to receive intercom dial tone to place another
intercom call. Two different Flash settings may be programmed to allow for
the use of Centrex or PBX features.
After you complete your call or if you make a dialing mistake:
 Press the Flash key FLASH
 Dial the new number
If you wish to use Centrex or PBX features:
 Press the Short Flash key S FLASH
 Dial new number or feature code
IWATSU TELEPHONE USER GUIDE - 132

