Multiple Ringing Mode - Iwatsu ENTERPROSE-CS Owner's Manual

 Press the Speaker key SPKR
To cancel Message Waiting:
 Press the Speaker key SPKR
 Wait for the dial tone
 Press the Message Waiting Control key MSG CTRL
 Dial the desired extension number
 Press the Release key RLS to cancel a message
 Wait for a confirmation tone
 Press the Speaker key SPKR

Multiple Ringing Mode

The Multiple Ringing mode feature expands the current Day and Night
Ringing modes by adding a Day-2 and Day-3 mode. This feature also adds the
option to choose between System Ringing and Group Ringing based on
incoming trunk groups or DNIS/DID number. Activation and control of the
Multiple Ringing mode is available from Iwatsu ICON Series 5930, 5910, and
5810 telephones.
System Ringing Mode (Default) Operation
When the ECS system is in the System Ringing Mode (default), pressing the
Night Mode key from an Iwatsu ICON Series telephone attendant position
(5810, 5910 and 5930) will take you to the Ringing Mode > Select Mode
screen.
When the Night Mode key is assigned to a self-labeling key position, the
current ringing mode will display as shown below:
To change the Ringing Mode from an ICON Series Attendant Position:
 Press the Night Mode key. The current ringing mode is displayed in
reverse video.
ATTENDANT POSITION USER GUIDE - 184