To register several Text Messages:
After entering a text message:
Press the Text Message key TXT MSG
Dial the next System Text Message Code
Repeat the same procedure as above
Through Dialing
Allows you to make an outside call for an extension that is toll restricted.
When an extension user asks to make an outside call, while you are speaking
to the extension:
Press the Hold key HOLD/DND
Press an outside line key
Wait for the dial tone
Dial the desired phone number
Press the Connect key CNCT
Trunk Access Control
Allows you to change the outside lines or line groups that extensions can
access.
To restrict outside line access:
Press the Speaker key SPKR
Wait for the dial tone
Press the Trunk Access Control key TAC
Dial
Dial the outside line group number, or,
Dial the outside line number
Press the Release key RLS
Wait for a confirmation tone
Press the Speaker key SPKR
To allow outside line access:
Press the Speaker key SPKR
Wait for the dial tone
Press the Trunk Access Control key TAC
Dial
ATTENDANT POSITION USER GUIDE - 197
-