Caller Id On Hold - Iwatsu ENTERPROSE-CS Owner's Manual

Caller ID on Hold

Caller ID on Hold can be enabled / disabled for the self-labeling keys on 5930,
5910 and 5810 phone. When enabled, the caller ID of the held call will appear
as the key name of the self-labeling key corresponding to the held call. To
enable:
 Press the Setup Menu key.
 Press User Options.
 Enter your Station Password and press Enter.
 Press the right navigation key to scroll to the Caller ID on Hold menu
page.
 Select Caller ID on Hold and select Enabled or Disabled.
 Default = Enabled. The active setting is displayed in reverse video.
 Press Exit to save your data and return to the main screen.
Camp-On
Allows you to alert a busy extension user that an outside call is waiting for
them to answer. The busy extension user will hear periodic tone bursts
through the speaker. If they have a display, the display will first indicate the
extension that sent the call followed by CAMP-ON. If the busy extension does
not respond within a specified period of time, the call will return back to you.
To Initiate Camp-On:
 Press the Transfer key TRAN
 Wait for the dial tone
 Dial the desired extension number
 Hang up
To answer a Camp-On:
 Hang up on the first call, or, press the Hold key HOLD/DND to place
the first call on Hold. Or, press the Call Park key PARK to place the
first call on Call Park.
 Answer the second call.
IWATSU TELEPHONE USER GUIDE - 126