Dynamic Host Configuration Protocol (Dhcp) Controller; E-Response Help Call; External Paging; Flexible Numbering - Iwatsu ENTERPROSE-CS Owner's Manual

2 = CO calls only.
3 = Intercom calls only.
 Wait for a confirmation tone.
 Hang up.
Dynamic Host Configuration Protocol (DHCP)
Controller
The IX-CCU on-board DHCP controller allows the Iwatsu Enterprise-CS to
dynamically assign up to 1024 IP addresses to IP stations and devices in the
system.

E-Response Help Call

The E-Response Help Call feature allows specific system extensions to
simultaneously call a group of extensions and access a system paging port
upon dialing a dedicated intercom group access number or, if the station
remains off-hook on Intercom without dialing for a programmable period of
time. This feature is also activated when the dialing of an Intercom call is
initiated but not completed within a specific amount of time. This feature may
also be programmed to have Iwatsu Enterprise-CS access system paging when
a station makes an E-Response Help Call.

External Paging

Iwatsu Enterprise-CS may be connected to an external paging system when the
optional IX-EDVIF card is added. Each IX-EDVIF will support four zones of
paging.

Flexible Numbering

Iwatsu Enterprise-CS has a flexible numbering plan. The numbers assigned
for intercom extensions, outside lines/groups, paging, hunt groups, park orbits,
and single line telephone feature codes are not fixed and may be up to four
digits in length.

Flexible Ringing

Outside lines directed to telephones may be assigned one of four tones to
provide an audible identification of the type of call.

Hunt Groups (Terminal, All Ring And Distributed)

A hunt group is a group of telephones that is assigned a common access code.
When this code is dialed, Iwatsu Enterprise-CS will search for an idle
telephone in that group. There are three ways that calls may search for an idle
IWATSU ENTERPRISE-CS SYSTEM FEATURES - 62