Putting A Call On Hold; Parking A Call - Iwatsu ENTERPROSE-CS Owner's Manual

Putting a Call on Hold

To put a call on Hold:
 Press the Hold key HOLD/DND and the lamp will intermittently flash
green on the outside line key
Picking Up a Held Call
To retrieve a held call:
 Press the green intermittently flashing key representing the call that you
wish to speak with

Parking a Call

When you cannot locate an extension user you may page the desired
individual. This feature allows the outside call to be automatically placed on
Call Park when the Page key is depressed. The display on the DSS will show
which park number the call has been placed on to allow the attendant to
announce where the call is parked.
When speaking to an outside party:
 Press and hold the Page key PAGE and the lamp will flash red
 Make an announcement stating which park number the call is on
 Release the page key PAGE to disconnect the paging circuit
ATTENDANT POSITION USER GUIDE - 177