Transferring a Call to Another Extension
There are two ways you may transfer calls; either using the Transfer key or
using the Direct Station Selection Unit.
Using the Transfer key:
Press the Transfer key TRAN and the lamp will flash red
Wait for the dial tone
Dial the desired extension number
Announce the call
Hang up, or, press the Connect key CNCT
Using the Direct Station Selection Unit:
Press the key on the Direct Station Selection Unit representing the
desired extension
Announce the call
Hang up, or, press the Connect key CNCT
Informing a Busy Extension User that the Attendant
has a Second Call Waiting for them
When transferring a call to a busy extension:
Hang up, or, press the Connect key CNCT
The extension user will hear a beep (camp-on) tone to inform them of the
second call. If the extension user does not respond to the beep tone the call
will return to the Attendant Position.
ATTENDANT POSITION USER GUIDE - 175