Preset Dial/Backspace Dialing; Prime Line Access; Privacy/Privacy Release - Iwatsu ENTERPROSE-CS Owner's Manual

Preset Dial/Backspace Dialing

This programming option allows you to dial an intercom or an outside phone
number and have the number appear on the display of your Digital Multiline
Display Telephone before the call is placed. This procedure ensures that the
correct number will be dialed.
To enter and display a number:
 Dial the desired number to be called and it will appear on the display
 Press FEAT to erase the digits entered one at a time starting from the
right side of the display.
To make an intercom call:
 Lift the receiver and the call will be placed
To make an outside call:
 Press an outside line key
 Lift the receiver and the call will be placed

Prime Line Access

This programming option allows a system extension to immediately access a
specific system extension, outside line, outside line group, hunt group, paging
zone, or optimized routing upon going off hook.
 Lift the receiver, or, press the Speaker key SPKR if your station is
equipped with a Speakerphone

Privacy/Privacy Release

All calls are private and no one may enter a call unless you release the privacy
for that call.
To release Privacy:
 Press the Feature key FEAT then dial
Release key PRV RLS if assigned as a Multipurpose key and the lamp
will be solid red
 You will hear a confirmation tone. To get back to a private call, repeat
the procedure and the lamp will be off.
IWATSU TELEPHONE USER GUIDE - 146

, or, press the Privacy