Call Monitoring; Add Digits To A Call Log Entry; Call Park/Swap - Iwatsu ENTERPROSE-CS Owner's Manual

 If the Call Log entry you just saved does not have a name associated
with the telephone number, refer to the Directory section of this guide to
Add a Name to a Personal Directory entry.

Add Digits to a Call Log Entry

This feature is used to add digit(s) to a Call Log entry before making a call
 Press the Call Log key on your display.
 Select the entry from the Call Log.
 Enter the digit(s) to be added to the entry (for example you may need to
add a  to dial a long-distance number).
 Press Dial to call the entry that you selected.

Call Monitoring

Allows you to silently monitor a call on another extension or line. In order for
this feature to operate on intercom off-hook signaling must be disabled.
To monitor a call on an outside line:
 Lift the receiver
 Wait for the dial tone
 Press the Monitor key MONITOR
 Press the outside line key
To monitor a busy extension's call:
 Lift the receiver
 Press the Monitor key MONITOR
 Dial an extension number
Note: This feature is not transparent when an IP phone is being monitored or
when the monitored station is networked using IP Campus.

Call Park/Swap

Park a call so that it can be answered from another extension.
Parking a Call
When speaking on an outside line:
 Select the Park key.
45
This feature requires a Float or CO line key in the key pattern.
IWATSU TELEPHONE USER GUIDE - 121
45
.