Call Forwarding - Iwatsu ENTERPROSE-CS Owner's Manual

For Short Flash (Centrex or PBX use):
 Press and release the receiver button quickly or press the Flash key.
 Dial the Short Flash code
 Dial new number or feature code.
The Flash key can only be used when the call is connected.

Call Forwarding

Set Forward Destination
 Lift the receiver (handset).
 Enter the Call Forward Code
 Enter the Call Type you wish to forward:
1 = All calls (CO/Intercom).
2 = CO calls only.
3 = Intercom calls only.
 Enter the Flexible Call Forward Mode:
1 = All calls to another extension or hunt group.
2 = Busy/No Answer calls to another extension or hunt group.
3 = No Answer calls to another extension or hunt group.
4 = All Calls forward to an external number (using Personal Speed Dial
Codes 90-99).
 Do one of the following:
 If you chose Mode 1,2, or 3, enter the extension or hunt group number.
 If you chose Mode 4, enter the Personal Speed Dial Code (90-99). If the
setting is valid, you will hear a confirmation tone. If the setting is
invalid, you will hear a warning tone.
 Hang up.
Forward Cancel
You may cancel the forwarding of All calls, CO calls only, or Intercom calls
only.
 Lift the receiver (handset).
 Enter the Cancel Code
 Enter the Call Forward Code
 Enter the Call Type number you wish to cancel:
1 = All calls (CO/Intercom).
SIP & SINGLE LINE TELEPHONE USER GUIDE - 212
.
.
.
.