Ix-8Psub-1 Eight-Port Digital Station Card; Ix-16Psub-2 Sixteen-Port Digital Station Card - Iwatsu ENTERPROSE-CS Owner's Manual

IX-8PSUB-1 Eight-Port Digital Station Card

An IX-8PSUB-1 card provides eight station terminal ports for Attendant
Consoles, DSS Units and Digital Telephones that are connected through star
wiring. Each port connects the station terminal with a two-wire cable that
carries bi-directional data transmission (ping-pong transmission).
Ports: 8 ports/card.
Stations: 2 ports required for: IX-ATT,
1 port required for: Platinum 18d, Platinum 12d, Platinum DSS, IX-DSS-3,
IX-BLF, IX-KTD/S-3, IX-12KTD-2, DCKT970 (may
share a port with a key telephone), IX-DCKT900 (may
share a port with a key telephone), IX-MKT, IX-
COMLINK-2, IX-DDPH, IX-BLF, IX-MSGU (per
channel), IX-BPAD, and IX-BPCU.

IX-16PSUB-2 Sixteen-Port Digital Station Card

The IX-16PSUB-2 is designed specifically for the 5800 and 5810 Digital Key
Telephones. This card is the interface for up to 16 5800 and/or 5810 digital
stations to the ECS. Each circuit of the IX-16PSUB-2 card is star connected to
an 5800 or 5810 digital telephone using #22/24 AWG one-pair twisted cable.
Single-pair cable allows for bi-directional data transmission or ping-pong
transmission. The loop limit of ECS digital station terminals is 1,000 feet. The
loop limit can be extended to a maximum of 2,100 feet using the optional IX-
58EXTENDER installed in the KT.
Ports: 16 ports/card
Stations: 1 port required for: 5800/5810
Note: Legacy Iwatsu telephones and devices, including the DCKT970, DDPH
door phone, PSUBMDM, IX-12KTD-3, Platinum 18d and 12d are not
compatible with the IX-8PSUB-2 or IX-16PSUB-2. These telephones may
only be connected to the IX-16PSUB, IX-8PSUB, IX-408, or IX-044 cards.
GENERAL DESCRIPTION - 39