Forward Status / Inactivate; Call Forward—Follow-Me; Set Forward Destination - Iwatsu ENTERPROSE-CS Owner's Manual

 Select the key that corresponds to a pre-programmed forwarding
destination.
 The selected forward destination will flash when activated and a red
LED will appear on the Call FWD key.
 Press Exit to return to the main menu.

Forward Status / Inactivate

To check the Forward status of your phone or to cancel station forwarding:
 Press the Call FWD menu key. The active selection will be flashing and
your status will appear on the top two lines of the display.
 Press the corresponding key to inactivate call forwarding.
 Press the Exit to end the operation.
Call Forward—Follow-Me
To set Follow Me forward, from the destination extension:
 Press the Call FWD menu key.
 Select the Follow-Me key.
 Enter the number for the extension you are forwarding from.
 Press Enter.
 Press Exit to end the operation.
To cancel Follow Me forward, from the forwarded station:
 Press Call FWD.
 Select the flashing (active) entry.
 Press Exit to end the operation.
Call Forward (All Phones Except 5930, 5910 and 5810)
Follow these instructions for the Iwatsu ICON 5900, 5800 and IX-12KTD-3
telephones or any other legacy Iwatsu telephone except for the Iwatsu ICON
5930, 5910 or 5810 telephones with self-labeling keys.
Allows you to send your calls to an internal destination or external line (using
Personal Speed Dial numbers 90-99). You can also separate call forward
destinations for ICM incoming and CO incoming calls. For instance, you could
set all intercom calls to go to your cell phone, and all CO calls to be forwarded
to your voice mail.

Set Forward Destination

 Lift the receiver (handset) or press SPKR
IWATSU TELEPHONE USER GUIDE - 116